by Dave Boulden | Aug 17, 2010 | DIY build, Featured
Another update. Construction is now complete. I installed a heatsink on the regulator in the volume control board, that issue is now solved. I picked up a new voltage regulator board for the PSU from the kit supplier Conrad. Installed that and power is now working...
by Dave Boulden | Jul 27, 2010 | DIY build
Quick update: I’ve now finished assembling the unit. Several hours with a CorelDraw template, a centre punch and a variety of drill bits in my pillar drill resulted in a case with all the holes prepared. The wrinkly appearance of the front panel is purely down...
by Dave Boulden | Jul 17, 2010 | DIY build
I’ve finally made a start on building a passive monitor controller. I’ve had a good look at the various options available on the market and decided that I can build the kind of spec I’m looking for much cheaper than I can buy one. It will have 4...
Recent Comments